Yaskawa iQpump Controller User Manual - Manual (Page 65)

3.4 Drive Main Menu
YASKAWA TM.iQp.06 iQpump Controller User Manual 65
■ U2 Fault Trace List
After viewing the “Monitor” parameter list, in order to view the “Fault Trace” parameter list, follow the key operations below Figure 3.4 .
Figure 3.4 U2 Fault Trace List Access Procedure
Use and keys to scroll through the U2 Fault Trace Parameter List.
Table 3.9 U2 Fault Trace Parameter List
U1-64
Pump Running 2
Pump Running2
U1-92
Pump Status
Pump Status
U1-65
Pump Available 1
Pump Available1
U1-93
Total Setpoint Compensation
Total SP Comp.
U1-66
Pump Available 2
Pump Available2
U1-94
Motor Speed
Motor Speed
U1-67
Network Activity
Network Activity
U1-95
Flow Rate
Flow Rate
U1-68
Time to Alternate
Time to Alternate
U1-96
Volume Accumulated (fine)
Volume (fine)
U1-90
Pump Setpoint Reference
Pump Setpoint
U1-97
Volume Accumulated (course
Volume (course)
U1-91
Pump Feedback
Pump Feedback
U1-98
Water Level
Water Level
U1-92
Pump Status
Pump Status
U1-99
Anti-No-Flow Timer
ANF Timer
Fault Trace Parameters
U2-01 Current Fault
U2-02 Last Fault
U2-03 Frequency Ref
U2-04 Output Freq
U2-05 Output Current
U2-07 Output Voltage
U2-08 DC Bus Voltage
U2-09 Output kWatts
U2-11 Input Term Sts
U2-12 Output Term Sts
U2-13 AC Drive Status
U2-14 Elapsed Time
Monitor
Parameter Name
Digital Operator Display
Monitor
Parameter Name
Digital Operator Display
-DRIVE- Rdy
Monitor
U1 -01= 0.00Hz
- - - - - - - - - - - - - - - - - - - -
U1-02= 0.00Hz
U1-03= 0.00A
-DRIVE- Rdy
Fault Trace
U2 -01= None
- - - - - - - - - - - - - - - - - - - -
U2-02= None
U2-03= 0.00Hz
-DRIVE- Rdy
Current Fault
U2- 01 = None
- - - - - - - - - - - - - - - - - - - -
U2-02= None
U2-03= 0.00Hz
-DRIVE-
U1-02=
Monitor
U1 - 0.00PSI
0.00Hz
U1-91= 0.00PSI
Rdy
01 =