Hitachi GR2000 Series - Manual (Page 105)

Confirmation of interface state and routing state
GR2K-GA-0015 5-5
Ver. 07-02
1. Execute a show interfaces command and confirm that the state display in detail
information item local management (PVC state confirmation procedure) of line or
timeslot is "up".
Figure 5-6 Example of display of WAN PVC state confirmation procedure
2. Execute a show frame-relay command and confirm that the display in display
item <DLCI state> is "active" (in normal operation).
Figure 5-7 Example of display of DLCI state
3. When this router is connected by point to point, execute a ping frame-relay
command and confirm that PVC (DLCI) connection is established ("Received" is
displayed).
Figure 5-8 Example of display of inverse ARP response
5.1.2.4 ISDN PPP
When ISDN-PPP is specified for the layer 2 protocol of a BRI or PRI line, execute a
show peer command and confirm that the communication peer state of
communication peer information is "active" (in operation).
Figure 5-9 Example of display of communication peer state
> show interfaces nif 0 line 0 ts 1
2000/04/02 12:00:00
NIF0: active 8-port BRI(leased line/dial up) retry:1
Line0: active up BRI(leased line/dial up) retry:1
Timeslot: 1-2 active up
Protocol:Frame Relay local management:Q933 bidirectional up
[Omitted hereinafter.]
>
> show frame-relay nif 0 line 0 ts 1 dlci 16
2000/04/02 12:00:00
NIF0: active 2-port PRI(leased line/dial up) retry:2
Line0: active up PRI(leased line/dial up) retry:1
description: Kansai local area communication line
Timeslot: 1-2 active
Protocol:Frame Relay
description: Kyoto area network
DLCI16 active forward static MTU:4096 Bytes no congestion
[Omitted hereinafter.]
>
> ping frame-relay nif 0 line 1 dlci 16
Data Received InARP-seq=0
Data Received InARP-seq=1
Data Received InARP-seq=2
Data Received InARP-seq=3
Data Received InARP-seq=4
>
> show peer peer1
2000/04/02 12:00:00
peer1: active ID:user1
Phone Number1:0457743333
Phone Number2:0457744444/1234
[Omitted hereinafter.]
>