Hitachi GR2000 Series - Manual (Page 161)

Tasks During Operation
GR2K-GA-0015 6-7
Ver. 07-02
6.5 Confirming MC capacity
It is recommended the usage state of a file system in MC during operation is
confirmed using a show mc command. If usage is close to 100%, take proper
measures after referring to Subsection 7.1.3, “Mode cannot be switched”.
Figure 6-7 Confirmation of MC capacity
> show mc
Slot0 : primary Slot , mc-enabled
HN-F9533-64 [MC64] , GR2000 format , 00070000
29,034KB used (user Area: 29,034KB , dump Area: 0KB)
27,926KB free (user Area: 21,824KB , dump Area: 6,102KB)
56,960KB total(user Area: 50,858KB , dump Area: 6,102KB)
Slot1 : secondary Slot , mc-disabled
>