Hitachi GR2000 Series - Manual (Page 132)

Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview
5-32 GR2K-GA-0015
Ver. 07-02
Figure 5-60 Multipath route information display
(b) Confirm communication with the relevant destination address.
Confirm using a ping ipv6 <IPv6 Address > specific-route source <Source
Address> command whether the interface of the router used for load balance can
communicate with the router used as a communication peer. Specify the router’s
local IPv6 address of the interface, used for load balance, for <Source Address> of
the ping ipv6 command.
5.5.8 Confirm that VRRP is synchronized
The contents of confirmation when a VRRP function is used in the router are as
described below.
5.5.8.1 Confirmation after setting of configuration definition
(a) Confirmation of route information
Execute a show vrrpstatus detail command and confirm whether the setting
contents of VRRP information defined using a configuration definition command
(virtual-router) are reflected properly.
> show ipv6 route
Total: 4 routes
Destination Next Hop
Interface Metric Protocol Age
::1/128 ::1
localhost 0/0 Direct 51m 45s
3ffe::/64 fe80:11::1
LAN11 0/0 Static 50m 30s
fe80:12::1
LAN12 - - -
fe80:13::1
LAN13 - - -
fe80:14::1
LAN14 - - -
fe80::/64 fe80:20::1
v11 0/0 Direct 51m 27s
fe80:20::1/128 ::1
localhost 0/0 Direct 50m 30s 29s
>