Hitachi GR2000 Series - Manual (Page 144)

Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview
5-44 GR2K-GA-0015
Ver. 07-02
Figure 5-81 Result of show ipv6 mld interface Command
5.7.3.2 Group information
Enter the show ipv6 mld group command from the terminal and ensure that the group
in the Group Address is appropriate. If no Group is shown, the group member (host)
may not have sent the MLD-Report. Inspect the host (PC).
Figure 5-82 Result of show ipv6 mld group Command
> show ipv6 mld interface
Interface Querier Group Count This Router
Multi1 fe80::1200:87ff:fe10:2959 4 N
Multi3 fe80::1 2 N
Multi5 fe80::200:87ff:fe10:1959 5 Y
Multicast0123 fe80::1234 3 N
Multi7 fe80::2592 6 N
[Omitted hereinafter.]
>
> show ipv6 mld group brief
Group Address Last Reporter Interface
ff0e::0123 fe80::3 Multi1
ff0e::1234 fe80::200:87ff:fe7a:baaa Multi2
ff0e::2345 fe80::1 Multi2
ff0e::3456 fe80::5 Multi3