Hitachi GR2000 Series - Manual (Page 261)

Troubleshooting
GR2K-GA-0015 7-95
Ver. 07-02
2. When the settings in the configuration information are appropriate but the SNMP
manager cannot receive SNMP traps, there is a possibility that the SNMP frames
are filtered (discarded) somewhere between the SNMP manager and this router.
Confirm your network administrator to see if filtering is performed on SNMP
frames. (SNMP trap transmission uses the UDP frame with the port number 162.)
(config)# show snmp
snmp {
"public" {
20.1.1.1 read_write none
10.1.1.1 read ex_trap level 7
}
"event-monitor" {
30.1.1.1 read trap
}
}
(config)#
Ensure that either trap or ex-trap is
displayed.
Indicates IP address of registered
SNMP manager.
Indicates community name of regis-
tered SNMP manager.