Hitachi GR2000 Series - Manual (Page 160)

Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview
6-6 GR2K-GA-0015
Ver. 07-02
6.4 Confirming SNMP trap information
When an SNMP agent function is used in the router, the event notification called a
trap where a failure which has occured is transmitted to the SNMP manager. The
change in the state of a router can be recognized by this trap information, so confirm
the change regularly during operation. The trap information peculiar to the router is
shown in the table below.
See Section 33.1 of GR2000 Operations Log and MIB Reference for other trap
information.
Table 6-1 Trap information peculiar to the router
No. Type of trap Description Generation conditions
1 gr2kSystemMsgTrap Outputs a system
message. When a system message is output.
2 gr2kStandbySystemUpTrap Restarts standby RM
normally. When, in a RM duplex unit, standby RM is judged to
be in the normal operational state after cold start.
3 gr2kStandbySystemDownTra
p Detects a standby RM
failure. When, in a RM duplex unit, standby RM is judged to
be defective after cold start.
4 gr2kTemperatureTrap Shifts the temperature
state. When the RM monitoring temperature is shifted to the
normal, caution, warning, or abnormal state.
5 gr2kAtmPvcTrap Notifies a PVC failure. When one or more PVC in an ATM interface is newly
put into the communication disable state.