Hitachi GR2000 Series - Manual (Page 122)

Hitachi Gigabit Router GR2000 Series Enhanced Version Operations - Device Management Overview
5-22 GR2K-GA-0015
Ver. 07-02
or the neighbor PIM router may not have sent the PIM-Hello. Inspect the neighbor
PIM router.
Figure 5-41 Result of show ip pim interface Command
5.4.2.2 Adjacent information
Enter the show ip pim neighbor command from the terminal and ensure that the
Neighbor Address in the target Address is appropriate. If no Neighbor Address is
shown, the neighbor PIM router may not have sent the PIM-Hello. Inspect the
neighbor PIM router.
[PIM-DM]
> show ip pim interface
Address Interface Component Vif Nbr Query JP C-RP DR
Count Intvl Intvl
192.10.10.1 Multi1 PIM-DM 1 2 30 - - -
192.10.20.1 Multi2 PIM-DM 2 0 30 - - -
>
[PIM-SM]
> show ip pim interface
Address Interface Component Vif Nbr Hello DR
Count Intvl
192.10.10.1 Multi1 PIM-SM 1 2 30 192.10.10.5
192.10.20.1 Multi2 PIM-SM 2 0 30 192.10.20.1
>
This Router
PIM Router
PIM-Hello
Multi2
(192.10.20.1)
Multi1 (192.10.10.1)
PIM Router
Nbr Count = 2 because two
neighbor PIM routers exist.
Router
(non-PIM)
Nbr Count = 0 because no
neighbor PIM router exists.
PIM-Hello