6 confirming the state of vc in eompls (l2-vpn) – Hitachi GR2000 Series User Manual

Page 147

Advertising
background image

Confirmation of interface state and routing state

GR2K-GA-0015

5-47

Ver. 07-02

Figure 5-85 Display of label and forwarding information by IP address designation

Figure 5-86 Display of label and forwarding information by VPN ID designation

5.8.6

Confirming the state of VC in EoMPLS (L2-VPN)

Execute a show mpls 12transport command from the operation terminal to the
router and confirm the state of VC (e.g. VC ID is set as 5).

Figure 5-87 Result of execution of show mpls 12transport command

Check the possible cause according to Subsection 7.11.5, “VC of EoMPLS(L2-VPN)
has not been established
”. when the state of VC is not established.

> show mpls forwarding-table 192.168.113.101/32

total:1

FEC NextHop Label Interface Packets

192.168.113.101/32 172.16.113.117 Out 1048575 Department1 4294967295

>

> show mpls forwarding-table vpn Osaka1213

total:2

FEC NextHop Label Interface Packets

VPN:Osaka1213

192.168.11.0/24 172.16.11.5 Out 1048571 Department2 15

/1003223

192.168.12.0/24 - In 30 ********** -

>

>show mpls l2transport vc 5

Transport Interface Name VC Local Remote Tunnel

VC ID State VC Label VC Label Label

5 office1 UP 23 26 1048576

>

Confirm here.

Advertising