Lenze 9400 - Manual (Page 700)

13 Diagnostics & fault analysis
13.7 Error messages of the operating system
700
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Negative direction of rotation limited [0x00b8000a]
Speed has been limited [0x00b8000b]
Acceleration has been limited [0x00b8000c]
Deceleration has been limited [0x00b8000d]
Module ID (decimal) Error ID (decimal)
184: Basic drive functions 10
Response (Lenze setting printed in bold) Setting: C02716/1 ( Adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Due to the setting of C02707 it was tried to traverse in
the impermissible negative direction of rotation.
• Only traverse in permissible (positive) direction of
rotation.
• Change setting of the permissible direction of
rotation ( C02707 ).
Module ID (decimal) Error ID (decimal)
184: Basic drive functions 11
Response (Lenze setting printed in bold) Setting: C02716/3 ( Adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
• The requested profile speed is higher than the
maximum speed set in C02703 and has been limited
to this speed.
• The required profile speed cannot be achieved with
the motor reference speed set in C00011 .
• Reduce speed of the traversing profile of the basic
function (manual jog, homing, or positioning).
• Increase maximum speed ( C02703 ).
• Deactivate monitoring of the limit values by the basic
function "Limiter".
• Set motor reference speed correctly ( C00011 ).
Module ID (decimal) Error ID (decimal)
184: Basic drive functions 12
Response (Lenze setting printed in bold) Setting: C02716/3 ( Adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The requested profile acceleration is higher than the
maximum acceleration set in C02705 and has been
limited to this acceleration.
• Reduce acceleration of the traversing profile of the
basic function (manual jog, homing, or positioning).
• Increase maximum acceleration ( C02705 ).
• Deactivate monitoring of the limit values by the basic
function "Limiter".
Module ID (decimal) Error ID (decimal)
184: Basic drive functions 13
Response (Lenze setting printed in bold) Setting: C02716/3 ( Adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The requested profile deceleration is higher than the
maximum acceleration set in C02705 and has been
limited to this acceleration.
• Reduce acceleration of the traversing profile of the
basic function (manual jog, homing, or positioning).
• Increase maximum acceleration ( C02705 ).
• Deactivate monitoring of the limit values by the basic
function "Limiter".