Rockwell Automation 1336E IMPACT Adjustable Frequency AC Drive User Manual V 1-4.XX - Manual (Page 14)

1-2 Overview
• S-Curve
• autostart (auto restart, power up start)
• start and stop dwells
• analog input filters
• process trim
• fast flux up
• 2/3 wire control
• feedback filters (light, heavy, lead/lag, and notch)
• Flying Start
Options
The 1336 IMPACT drive provides the following options:
• DriveTools
, which is PC Windows based programming
software compatible with the 1336 IMPACT drive and also other
Allen-Bradley 1336 and 1395 products
• dynamic braking
• AC motor contactor
• L Option board with or without an encoder interface
• Human Interface Module (HIM)
• Graphics Programming Terminal (GPT)
• gateway modules (Bulletin 1203 communications modules)
Protective Features
The 1336 IMPACT drive uses the following protective measures:
• programmable motor overload protection (I
2
T) investigated by
UL to comply with NEC Article 430
• inverter overload protection (IT)
• overspeed detection, even when operating as a torque follower
• programmable stall detection
• peak output current monitoring to protect against excessive
current at the output due to a phase-to-ground or phase-to-phase
short
• ground fault monitoring
• DC bus voltage monitoring to protect against undervoltage or
overvoltage conditions
• power structure heatsink temperature monitoring
• motor overspeed
• internal voltage reflection reduction mechanism