H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 125)

18-5
Enabling SNMP
Select Device > SNMP from the navigation tree to enter the SNMP configuration page, as shown in
Figure 18-4 . On the upper part of the page, you can select to enable or disable SNMP and configure
parameters such as SNMP version; on the lower part of the page, you can view the SNMP statistics,
which helps you understand the running status of the SNMP after your configuration.
Figure 18-4 Set up
Table 18-3 describes the configuration items for enabling SNMP.