H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 459)

39-6
Figure 39-7 Wireless service configuration page
Click the expand button before Security Setup to expand the configuration items.
Select Open-System as the authentication type.
Select the Cipher Suite check box, and then select CCMP and TKIP (select a cipher suite
according to your actual network requirements). Select WPA as the security IE.
Click the expand button before Port Security to expand the configuration items.
Select the Port Set check box.
Select userlogin-secure-ext as the port mode.
Select the Mandatory Domain check box, and then select system.
Select EAP as the authentication method.
Disable handshake.
Disable multicast trigger.
Click Apply. A configuration progress dialog box appears, as shown in Figure 39-8 .