H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 351)

33-15
Figure 33-19 Verify inter-AC roaming
4) Verification by viewing the BSSID field
Before roaming, select Summary > Client, select the Detail Information tab, and then click the desired
client to view the roaming information of the client.
From the roaming information shown in the following figure, you can see that the client connects to the
WLAN through AP 1, and the BSSID of AP 1 is 000f-e27b-3d90.
Figure 33-20 Client status before inter-AC roaming
After inter-AC roaming, you can see that the client is connected to the WLAN through AP 2, and the
BSSID of AP 2 is 000f-e233-5500, as shown in Figure 33-21 .