H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 63)

7-2
Figure 7-1 Device info page
Select the refresh mode from the Refresh Period drop-down box.
If you select a specific period (such as, 1 minute), the system periodically refreshes the Device
Info page according to the specified period;
If you select Manual, you need to click Refresh to refresh the Device info page.
Device Info
Table 7-1 describes the device information configuration items.
Table 7-1 Device information configuration items
Item Description
Device Name Displays the device model.
Product Information Displays the product information.
Device Location
Displays the location of the device.
You can set a character string to describe the physical location of the device on
the SNMP Setup page by selecting Device > SNMP.
Contact Information
Displays the contact information for device maintenance.
You can set a character string to describe the contact information for device
maintenance on the SNMP Setup page by selecting Device > SNMP.
SerialNum Displays the serial number of the device.
Software Version Displays the software version of the device.
Hardware Version Displays the hardware version of the device.
Bootrom Version Displays the Boot ROM version of the device.