Figure 36-8, Table 36-3 – H3C Technologies H3C WX6000 Series Access Controllers User Manual

Page 407

Advertising
background image

36-11

Item

Description

Specified
Domain

Specify the mandatory authentication domain for the interface.

After you specify a mandatory authentication domain for an interface, the device will use the
mandatory authentication domain for authentication, authorization, and accounting (AAA) of
the portal users on the interface, ignoring the domain names carried in the usernames.
Thereby, you can specify different authentication domains for different interfaces as needed.

The available ISP domains are those specified on the page you enter by selecting
Authentication > AAA from the navigation tree. Refer to

AAA

for further details.

Figure 36-8 Add a portal server

Table 36-3 Portal server configuration items

Item

Description

Server Name

Specify the portal server name.

IP

Specify the IP address of the external portal server.

Key

Specify the shared key to be used for communication between the device and the portal server.

When a local portal server is used, you can specify the shared key but it does not take effect.

Port

Specify the destination port number to be used by the device to send packets to the portal
server unsolicitedly. The port number must be the same with that used by the remote portal
server.

When a local portal server is used, you can specify the port number but it does not take effect.

URL

Specify the URL for HTTP packets redirection.

DNS is supported, however, you need to configure a portal-free rule and add the DNS
server address into the portal-free address range.

When a local portal server is used, you can specify the URL but it does not take effect.

Advertising