H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 126)

18-6
Table 18-3 Configuration items for enabling SNMP
Item Description
SNMP Specify to enable or disable SNMP.
Local Engine ID
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP agent.
If the engine ID when the user is created is not identical to the current engine ID, the
user is invalid.
Maximum Packet Size Configure the maximum size of an SNMP packet that the agent can receive/send.
Contact
Set a character string to describe the contact information for system maintenance.
If the device is faulty, the maintainer can contact the manufacture factory according to
the contact information of the device.
Location Set a character string to describe the physical location of the device.
SNMP Version Set the SNMP version run by the system
Return to SNMPv1 or SNMPv2c configuration task list or SNMPv3 configuration task list .
Configuring an SNMP View
Select Device > SNMP from the navigation tree, and then click the View tab to enter the page as shown
in Figure 18-5 .
Figure 18-5 View page
Creating an SNMP view
Click Add, the Add View window appears as shown in Figure 18-6 . Type the view name and click
Apply, and then you enter the page as shown in Figure 18-7 .
Figure 18-6 Create an SNMP view (I)