H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 480)

41-11
Table 41-6 Configuration items for retrieving a PKI certificate
Item Description
Domain Name Select the PKI domain for the certificate.
Certificate Type Select the type of the certificate to be retrieved, which can be CA or local.
Enable Offline
Mode Select this check box to retrieve a certificate in offline mode (that is, by an out-of-band
means like FTP, disk, or e-mail) and then import the certificate into the local PKI system.
Get File From
Device
Get File From PC
Specify the path and name of the certificate file.
If the certificate file is saved on the device, select Get File From Device and then
specify the path of the file on the device.
If the certificate file is saved on a local PC, select Get File From PC and. then specify
the path to the file and select the partition of the device for saving the file.
Password
Enter the password for protecting the private key, which was specified when the
certificate was exported.
After retrieving a certificate, you can click View Cert corresponding to the certificate from the PKI
certificates list to display the contents of the certificate, as shown in Figure 41-10 .
Figure 41-10 Certificate details
Return to Configuration task list for requesting a certificate manually .
Return to Configuration task list for requesting a certificate automatically .