H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 28)

5-1
5
Quick Start
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
The Quick Start wizard will lead you through the following configuration steps to make your device
available for use:
Basic Configuration
Admin Configuration
IP Configuration
Wireless Configuration
RADIUS Configuration
Portal Configuration
Encryption Configuration
Guest Wireless Network Configuration
AP Configuration
Quick Start
Home Page of the Quick Start Wizard
From the navigation tree, select Quick Start to enter the home page of the Quick Start wizard, as shown
in Figure 5-1 .