H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 605)

50-1
50
Stateful Failover Configuration
Support for Stateful Failover depends on the device model.. Refer to section "Feature Matrixes" in
Compatibility Matrixes for details.
The sample output in this manual was created on the WX5004. The output on your device may
vary.
The grayed out functions or parameters on the Web interface indicate that they are not supported
or cannot be modified.
The models listed in this manual are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
Overview
Introduction to Stateful Failover
Some customers require their wireless networks to be highly reliable to ensure continuous data
transmission. In Figure 50-1 , deploying only one AC (even with high reliability) risks a single point of
failure and therefore cannot meet the requirement.
Figure 50-1 Network with one AC deployed
Internet
AC
Host
AP