H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 291)

31-37
Figure 31-47 Create an AP
Set the AP name to ap.
Select the AP model WA2220X-AG.
Select the serial ID as manual, and type the AP serial ID.
Click Apply.
2) Configure wireless service
# Create a wireless service
Select Wireless Service > Access Service from the navigation tree, and click New to enter the page
for creating a wireless service, as shown in Figure 31-48 :
Figure 31-48 Create a wireless service
Set the service name to psk.
Select the wireless service type crypto.
Click Apply.
# Configure wireless service.
After you create a wireless service, you will enter the wireless service configuration page. You need to
perform security setup when configuring PSK authentication, as shown in Figure 31-49 :