H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 140)

19-2
Figure 19-1 Loopback test configuration page
Table 19-1 describes the loopback test configuration items.
Table 19-1 Loopback test configuration items
Item Description
External
Testing
type
Internal
Sets the loopback test type, which can be selected between External and Internal.
Support for the test type depends on the device model.
Interface Specifies the Ethernet interface to have a loopback test.
After the above configuration, click Test to start the loopback test, and you can see the test result at the
right of the Test button, as shown in Figure 19-2 .