H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 78)

7-17
Figure 7-12 Display client statistics
Table 7-11 Description on the fields of client statistics
Field Description
AP Name Name of the associated access point
Radio Id Radio ID
SSID SSID associated with the client
BSSID Basic SSID
MAC Address MAC Address of the client
RSSI
Received signal strength indication. This value indicates the client
signal strength detected by the AP.
Transmitted Frames Number of transmitted frames
Best Effort(Frames/Bytes) Statistics of best effort traffic, in frames or in bytes.
Video(Frames/Bytes) Statistics of video traffic, in frames or in bytes.
Voice(Frames/Bytes) Statistics of voice traffic, in frames or in bytes.
Received Frames Number of received frames
Discarded Frames Number of discarded frames
You can collect statistics of priority queues such as Back Ground, Best Effort, Video and Voice on a
QoS client only. Traffic including SVP packets sent and received on a client where QoS is not enabled
falls into Best Effort priority queue. Therefore, the queues collected may be different from the queues
actually sent. You can collect statistics of priority queues carried in Dot11E or WMM packets; otherwise,
statistics collection of priority queues on the receive end may fail.