H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 95)

12-3
Figure 12-2 Display syslog
Table 12-3 describes the syslog display items.
Table 12-3 Syslog display items
Item Description
Time/Date Displays the time/date when system logs are generated.
Source Displays the module that generates system logs.
Level
Displays the severity level of system logs. For the detailed description of the severity
levels, refer to
Table 12-4 .
Digest Displays the brief description of system logs
Description Displays the contents of system logs.
You can perform the following operations in the syslog display page:
Click Clear to clear the log buffer.
Click Refresh to refresh the current page.
Table 12-4 System logs severity level
Severity level Description Value
Emergency The system is unavailable. 0
Alert Information that demands prompt reaction 1
Critical Critical information 2
Error Error information 3
Warning Warnings 4
Notification Normal information that needs to be noticed 5
Informational Informational information to be recorded 6
Debugging Information generated during debugging 7
Note: A smaller value represents a higher severity level.