H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 283)

31-29
Figure 31-29 Enable wireless service
Set the service1 check box.
Click Enable.
3) Bind an AP radio to a wireless service
Select Wireless Service > Access Service from the navigation tree, and click Bind at the right side of
the wireless service service1 to enter the page for binding an AP radio, as shown in Figure 31-30 :
Figure 31-30 Bind an AP radio
Select the check box before ap with radio type being 802.11g.
Click Bind.
4) Enable 802.11g radio
Select Radio > Radio from the navigation tree to enter the radio setup page, as shown in Figure 31-31 :
Figure 31-31 Enable 802.11g radio
Select the check box before wa2200 with the radio mode being 802.11g.
Click Enable.