IAI America MSCON - Manual (Page 48)

Chapter 2 Wiring
40
2.2 Circuit Diagram
Sample circuit diagrams are shown below.
[1] Drive (Motor) Power Supply Circuit
Note: Drive power supply voltage (100V/200V AC) cannot be changed after the product is
delivered.
L
Circuit
Breaker
Leak Current
Noise
Filter
Surge Absorber
MSCON
L
N
PE
(Earth on either
of them)
Class D grounding
(Formerly Class-III grounding:
Grounding resistance at 100Ω or less)
Motor power supply
connector
Screw terminal for
protective grounding
N
[2] Control Power Supply and Brake Power Supply Circuit
Caution: • When using an actuator equipped with a brake, supply a brake power (24V DC).
With the power not being supplied, 0A5 Electromagnetic Brake Non-Release
Error will occur. Do not attempt to supply a brake power if there is no actuator
with a brake.
• If having the control power supplied/cut on the 24V DC side, keep the 0V
connected and have the +24V supplied/cut (cut one side only). If cut also on 0V
side (cut both sides), it may damage the internal circuit.
Brake Power
Supply
Control Power
Supply
FG
24V
+24V
+ -
0V
0V
MSCON
Control Power Supply
Connector