INFICON HAPSITE ER Chemical Identification System - Manual (Page 100)

3 - 16
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
3.2.1 Changing the Default Method
The default method for the HAPSITE ER can be changed. By changing the default
method, the HAPSITE ER will prepare the newly selected method upon startup.
1 Touch SELECT METHOD.See Figure 3-27 .
Figure 3-27 Select Method
2 Highlight the desired method. See Figure 3-28 .
Figure 3-28 Choosing Method
3 Touch the Set Default button. Upon the next startup, the HAPSITE will begin
preparing the new default method.