INFICON HAPSITE ER Chemical Identification System User Manual
Page 395
11 - 57
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
7
In the Start column, choose either Run Button or Immediately for each
method. This selection determines how each method in the run is started. Refer
to
Figure 11-56
.
NOTE: The first method must be started with the Run Button. It will not start
automatically.
8
In the Sleep column, choose for or until for each method. Refer to
Figure
11-56
.
NOTE: The for option is used to enter a time period, such as one hour. The
until option is for a certain time, such as one o’clock.
9
In the Time column, enter the desired Time for the next method to start or the
length of Time to sleep before the next method starts. Refer to
Figure 11-56
.
10
Click Save. Refer to
Figure 11-56
.
11
Save the sequenced method to the desired location. Click OK. See
.
Figure 11-57 Saving Sequenced Method