INFICON HAPSITE ER Chemical Identification System - Manual (Page 468)

15 - 16
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
Figure 15-21 Service Model Attach Button
5 A bar graph displaying the progress of the attach will be displayed.
NOTE: The ATTACH SM button will become grayed out.
Figure 15-22 Bar Graph Showing the Attachment
6 When the Attach has successfully completed, the Service Module Attached
message will be displayed. See
Figure 15-22 .
15.8 Detaching the HAPSITE
Detaching the HAPSITE allows the safe removal of the HAPSITE from the Service
Module. The Detach procedure ensures that the interconnect plug on the HAPSITE
is closed at the proper time, and the two pumps in the Service Module are properly
shut down.
The detach procedure can be carried out either using ER IQ software, or using the
HAPSITE front panel display.