INFICON HAPSITE ER Chemical Identification System - Manual (Page 83)

2 - 45
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
2.11.2 Storing the Hot Swap Cable
The Hot Swap Cable and Battery have exposed electrical connections. Protect the
connections from moisture or contaminated environments by storing the battery
and cable connection in a protective plastic bag. See
Figure 2-56 .
Figure 2-56 Storing
2.11.3 Use as an Additional Battery Source
Attach the Battery to the HAPSITE via the Hot Swap Cable when the front panel
shows the level of charge on the internal battery is
 20%. This will provide an
additional battery source.