INFICON HAPSITE ER Chemical Identification System User Manual
Page 57
Advertising
2 - 19
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
1
Attach the RS-232 communications cable to the Service Module, as shown in
Figure 2-20
.
Figure 2-20 RS-232 Communication Cable Attached to Back Right Side of Service Module
2
Attach the RS-232 cable to the Laptop computer, as shown in
Figure 2-21
.
Figure 2-21 RS-232 Communication Cable Attached to Laptop
3
Turn on the Power switch for the Service Module, located at the back right
corner of the Service Module (refer to
Figure 2-18
).
4
Turn on the Laptop and open the ER IQ program.
Advertising