3 conc button – INFICON HAPSITE ER Chemical Identification System User Manual
Page 137
Advertising
3 - 53
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
3.7.1.4.3 CONC Button
Information about the concentrator can be found through this button. After touching
the CONC button, another key, CONC CLEAN, will be displayed. If this key is
active (black lettering), a concentrator cleanout can be run. Touch the CONC
CLEAN button if a concentrator cleanout is desired. If the CONC CLEAN button is
grayed out, a concentrator cleanout is in the process of running, an analysis is
being performed or a sample loop is installed. Above the buttons, the progress of
the cleanout will be displayed by a blue bar graph. See
Figure 3-91
.
Figure 3-91 CONC Button
Advertising