6 service module, 1 setting up the service module – INFICON HAPSITE ER Chemical Identification System User Manual
Page 55
2 - 17
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
2.6 Service Module
The Service Module is used to create a vacuum in the HAPSITE. It cannot be used
in a portable application.
For additional information on the Service Module, see
.
2.6.1 Setting Up the Service Module
Required Components
RS-232 communication cable.
Power cord for Service Module.
Laptop with ER IQ software installed.
When stored, the Service Module should have an aluminum plug placed on the top
opening. This plug is used to keep the Service Module free of moisture and debris.
NOTE: The aluminum storage plug is supplied with the Service Module. See
Figure 2-16
.
Figure 2-16 Aluminum Storage Plug on Service Module
Covering the aluminum plug is a yellow plastic cover which aids in protecting the
opening from foreign debris. See
Figure 2-17
. Remove the yellow cover before
proceeding, and store it in a safe location.
Figure 2-17 Yellow Plastic Protective Cover on Service Module