INFICON HAPSITE ER Chemical Identification System - Manual (Page 123)

3 - 39
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
16 The Qualitative Report can be found be touching the QUAL key. See Figure
3-66 . Alternately, highlight the QUAL key using the arrow keys and push OK
SEL. For each compound found, information regarding the Net Fit, the
retention time, the CAS number, the area and the number of hits will be
displayed.
Figure 3-66 Qualitative Report
17 The Quantitative Report can be found be touching the QUANT key. See Figure
3-67 . Alternately, highlight the QUANT key and push OK SEL. For each
compound found, information regarding the target ion, the retention time, the
Net Fit, the purity, the area and the concentration will be displayed.
Figure 3-67 Quantitative Reports
NOTE: If the method is not quantitative, the message "No Quant Reports
Found" will be displayed on the QUANT report screen. To determine
if the method is quantitative, see the box in the bottom right hand
corner of the main screen. See
Figure 3-68 .