3 touch screen options, 1 calibrating the touch screen – INFICON HAPSITE ER Chemical Identification System User Manual
Page 177
4 - 17
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
4.3 Touch Screen Options
NOTE: If the Touch Screen freezes, pushing the MENU and ESC keys at the same
time will turn off the system. Hold both keys until the systems powers
down. Turn system back on with the POWER button.
4.3.1 Calibrating The Touch Screen
If the touch point does not align with the icon pressed, a calibration may be
necessary. For example, when directly pressing the info icon, the Help feature (the
icon directly next to info) is accessed. When similar problems occur, it is necessary
to calibrate the touch screen. Proceed as follows to calibrate.
1
Touch MAIN or using the arrow keys, highlight MAIN and touch OK SEL. See
.
Figure 4-17 MAIN Button
2
From the dropdown menu, touch Touch Screen. Alternately, use the arrow
keys to highlight Touch Screen and push OK SEL. See
Figure 4-18
.
Figure 4-18 Selecting Touch Screen