INFICON HAPSITE ER Chemical Identification System - Manual (Page 331)

10 - 7
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
10.1.5 Data Review
Data review is used to view and analyze Data Files. To open files, double-click on
the Data Review icon in the System Setup window, or right-click on a HAPSITE
icon and select Data Review. Alternately, select a file from the Recent Files list in
System Setup view. The Data Review window is shown in
Figure 10-9 . Refer to
Chapter 9, Data Review for additional information on Data Review.
Figure 10-9 Data Review Recall Window
The window opens showing the data folder for the currently selected HAPSITE
Data Files, organized the same as method files. Data Files are saved under
/Data/method_folder_name/ where the method folder name corresponds
to the folder in which the method is located. For example, if the method called
Default was used to run the analysis, the folder would be Data/Default. To select a
file to open, open a folder, click on the desired data file to open, and then, click the
OK button. See
Figure 10-10 , which shows a selected Data File.
HINT: ER IQ Data Files are saved with a .hps file extension at the end of the
filename.