INFICON HAPSITE ER Chemical Identification System - Manual (Page 270)

8 - 10
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
8.5.2 Configuring the HAPSITE for Communications
1 If communication between the HAPSITE and the Laptop could not be
established using
Section 8.5.1, Setting Up Communications, on page 8-8 ,
continue with Step 2 .
2 Press the STAT key on the front panel of the HAPSITE until the System
Parameters page is displayed.
3 Use the arrow keys to highlight NET, push OK SEL. Alternately, touch NET.
The IP address of the HAPSITE will be displayed. Example: 10.210.4.62 /
255.254.0.0. Each HAPSITE will have a unique IP address.
4 On the Laptop, press Start. Depending on the Laptop’s set up follow either Step
4a or Step 4b .
4a Click on Settings, drag the cursor over Network Connections, drag the cursor
over Local Area Connection and click the Left Mouse Button. See
Figure
8-12 .
NOTE: For wireless connections, select Wireless Network Connection.
Figure 8-12 Network Connections Classic View
4b Click on Connect to, drag the cursor over Show All Connections and click
Left Mouse Button. Click on Local Area Connection. See
Figure 8-13 .