1 accessing nist from amdis – INFICON HAPSITE ER Chemical Identification System User Manual
Page 317
Advertising
9 - 31
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
Figure 9-38 AMDIS Confirm Window
This window shows the complete analysis, peak by peak. If there are any peaks
that were not identified by AMDIS, use the NIST database to identify them.
9.8.3.1 Accessing NIST from AMDIS
To use the NIST database to identify a peak not identified by AMDIS:
1
Highlight the peak not identified by clicking on the triangle above the peak
2
Select Analyze. Then, click Add component/scan to search list
3
Select Analyze. Then, click Go to NIST MS Program
The selected component scan from the search list will be placed into the NIST
program and will utilize the NIST database for identification. See
Figure 9-39
.
Advertising