INFICON HAPSITE ER Chemical Identification System - Manual (Page 172)

4 - 12
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
4.2 The MAIN Menu
The MAIN menu contains the following options: View Results, Smart Interface,
Adjust Brightness and Touch Screen. See
Figure 4-5 . For information regarding
View Results, refer to section 3.5.1, View Results/View Reports, on page 3-32 . The
Smart Interface option will run the HAPSITE ER using the HAPSITE Smart
software. This makes transitioning from the Smart Software to the ER software
easier. Adjust Brightness changes the level of lighting on the touch screen. The
Touch Screen option will enable or disable the touch screen. The Touch Screen
option also contains a touch screen calibration feature.
Figure 4-5 MAIN Menu
4.2.1 Smart Interface
To convert to the HAPSITE software, follow the procedure below.
1 Touch MAIN. See Figure 4-6 .
Figure 4-6 DISPLAY Menu