INFICON HAPSITE ER Chemical Identification System - Manual (Page 278)

8 - 18
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
8.8.1 Changing Access Levels
NOTE: When Normal access level is selected, a message will appear stating that
some areas of ER IQ will be restricted from access.
1 To change the access level, click on Tools on the System Setup Page.
1a Select Set Access Level.... See Figure 8-25 .
Figure 8-25 Choose Set Access Level.... from Tools Menu
2 To select advanced access, click on the Requested Access Level pull-down
menu and select Advanced. If a password has been entered, the current
password will need to be entered in the password box before pressing OK.
See
Figure 8-26 .
Figure 8-26 Change Access Level Window
3 The current access level of the system is displayed at the bottom right corner
of the ER IQ program, in the Status Bar, as shown in
Figure 8-27 .
Figure 8-27 Current Access level, shown in Status Ba r