INFICON HAPSITE ER Chemical Identification System - Manual (Page 44)

2 - 6
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
2.2.1 Attaching the Probe
To attach the probe line, plug the LEMO® communication line into the port on the
top of the HAPSITE. See
Figure 2-3 . When inserting, line up the red dots on the
communication line with the red dots on the plug. Insert the Valco connector into
the top of the HAPSITE as shown. Screw the connector into place.
Figure 2-3 Attaching the LEMO Connector on the Probe Line to the HAPSITE
HINT: Save all of the caps to cover ports in the event the instrument needs to be
decontaminated. Spare caps are provided in the Ship Kit. See Figure 2-4 .
Figure 2-4 Spare Cap Kit
Sample line with
Valco Bulkhead
Communication Line