2 if the red indicator is flashing, 3 if a battery does not accept a charge – INFICON HAPSITE ER Chemical Identification System User Manual

Page 521

Advertising
background image

16 - 45

IP

N 07

4-

47

1-

P1

B

HAPSITE ER Operating Manual

16.11.2.2 If the Red Indicator is Flashing

This indicates that the Battery Charger is unable to communicate with the battery
(through the center pin).

First, try the battery in a different receptacle. If the problem persists, contact
INFICON Customer Support. See

Chapter 17, Customer Support

.

If the problem is solved, proceed to charge the battery, but suspect a problem with
the receptacle. Inspect the receptacle, especially examining the center pin for any
insulating material or for signs of looseness. If nothing seems wrong, contact
INFICON Customer Support. See

Chapter 17, Customer Support

.

16.11.2.3 If a Battery Does Not Accept a Charge

If a battery’s charge status does not change during the charging cycle and the
respective indicator has been green, the battery may be at the end of life.

To be certain that the problem is not with the Battery Charger receptacle, try to
charge the battery in an alternate receptacle. If the problem persists, replace the
battery. If the battery should not be near the end of life, contact INFICON to discuss
other possible steps. See

Chapter 17, Customer Support

.

Advertising