INFICON HAPSITE ER Chemical Identification System - Manual (Page 269)

8 - 9
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
Figure 8-9 Add HAPSITE
4 The newly added HAPSITE will appear in the HAPSITE List. Press OK.
5 Press OK on the System Properties Window.
6 The newly added HAPSITE icon will now appear at the bottom of the System
Setup Window. If the HAPSITE appears, as in
Figure 8-10 , then
communications have been established.
Figure 8-10 Newly Added HAPSITE
6a If the HAPSITE appears with a Red "X" through it, the HAPSITE is not
communicating with the Laptop. If the HAPSITE icon appears with a Blue "X"
through the icon, then communication has not been fully established. See
Figure 8-11 .
Figure 8-11 Communication Has Not Been Established
6b Continue with Configuring the HAPSITE for Communications, see section
8.5.2 .
NOTE: If the HAPSITE is shown with an a Blue "X", setting up the HAPSITE
for communication using the IP address can also be tried.