INFICON HAPSITE ER Chemical Identification System User Manual
Page 208
5 - 14
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
5.4.3 Quick Reference SOP — Tri-Bed Concentrator Method
1
Verify that the Concentrator is installed.
2
If the system is Shutdown or in Extended Standby, either power on the
HAPSITE or take the system out of Standby. The HAPSITE will begin preparing
a Concentrator method. Refer to
for further
information.
3
When the HAPSITE has finished preparing, a prompt to press Run will be
displayed on the Laptop screen.
4
When the screen prompts, Collect Sample Now, hold the probe over the
sample until the screen prompts, Sampling Is Done.
5
When the run is complete, a Method Finished prompt will appear.
6
See
Section 3.5.1, View Results/View Reports, on page 3-32
or
for information on data review.
CAUTION
Do not place the sample probe in liquids while sampling.