2 loading a default method to the hapsite – INFICON HAPSITE ER Chemical Identification System User Manual
Page 265
Advertising
8 - 5
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
8.4.2 Loading a Default Method to the HAPSITE
1
From the Default Methods Menu, select the default method to load. Refer to
Figure 8-3, HAPSITE Default Methods, on page 8-3
HINT: Refer to
Section 8.4.1, Locating Default Methods, on page 8-3
the default methods.
2
Press the Load button. See
Figure 8-3, HAPSITE Default Methods, on page
.
3
Press the Save button at the bottom of the Method Editor Description window.
See
NOTE: The method file name is the default method name with a two digit
number appended (e.g., 01). If the two digits are not desired, then
remove them from the file name before pressing the Save button.
Figure 8-4 Default Methods Method Editor Description Window
Advertising