4 peak scan window – INFICON HAPSITE ER Chemical Identification System User Manual
Page 242
7 - 16
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
Short AutoTune . . . . . . . . . . . . . . . Starts the Short AutoTune function
Long AutoTune . . . . . . . . . . . . . . . . Starts the Long AutoTune function
Noise Check . . . . . . . . . . . . . . . . . . Scans a "quiet" mass range (no peaks) to
determine the electronic baseline and
threshold noise level.
Tune Checkup. . . . . . . . . . . . . . . . . Runs a mass calibration and noise check.
Zoom . . . . . . . . . . . . . . . . . . . . . . . . Enables the cursor to select a section of Full
scan or a peak scan and zoom to that
section.
Mass Adjust . . . . . . . . . . . . . . . . . . Enables the cursor to select a mass peak
and drag the mass peak to a different
position on the mass axis.
7.5.4 Peak Scan Window
The Peak Scan Window, see
Figure 7-18
, displays the mass peak and enables the
user to manually control/tune the mass peak.
Figure 7-18 The Peak Scan Window and Controls