INFICON HAPSITE ER Chemical Identification System - Manual (Page 60)

2 - 22
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
Figure 2-25 Remove the Green Plastic Protective Cover on the Bottom of the HAPSITE
Figure 2-26 shows the yellow protective cover removed from the bottom of the
HAPSITE.
Figure 2-26 Yellow Plastic Protective Cover Removed from the Bottom of the HAPSITE
2 Carefully place the HAPSITE on top of the Service Module. The opening at the
bottom of the HAPSITE should be placed onto the opening on the Service
Module.
3 Attach the Service Module to the HAPSITE using the black latch at each side
of the Service Module.
Figure 2-27 shows the right side Service Module latch.