INFICON HAPSITE ER Chemical Identification System - Manual (Page 373)

11 - 35
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
The SIM page for Survey mode provides the ability to create only one Scan Set of
multiple masses. Refer to
Figure 11-26 .
Scan Set Name . . . . . . . . . . . . . . . . A name should be created here to reference
the specific set of ions being detected.
Timed Mode. . . . . . . . . . . . . . . . . . . When selected, allows the time of the survey
method to be set to a determined length. This
method will run for a programmed amount of
time.
Trigger Mode. . . . . . . . . . . . . . . . . . When selected, programs this method to
start or stop based on the Run button.
Pressing the Run button turns on the sample
pump. This signals the beginning of the run.
Pressing Run again will turn off the sample
pump and end the sample run.
Scans to Average . . . . . . . . . . . . . . This determines how many scans will be
collected and averaged before the results are
updated on the chromatogram.