3 updating the front panel software from the usb – INFICON HAPSITE ER Chemical Identification System User Manual
Page 190
Advertising
4 - 30
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
4.4.3 Updating the Front Panel Software from the USB
Periodically, there may be updates to front panel software. The software can be
updated using a USB drive.
1
Insert the USB drive into the USB port which is located inside the front panel
on the top left hand side.
NOTE: When inserting the USB drive, the solid portion should be on the right.
2
Close the front panel of the HAPSITE.
3
Touch the Accessories icon. Alternately, push the STAT button until the
Accessories icon is highlighted. See
Figure 4-41
.
Figure 4-41 Accessories Icon
4
Touch the USB icon. Touch UPDATE FROM USB or using the arrow keys,
highlight UPDATE FROM USB and push OK SEL. See
Figure 4-42
.
Figure 4-42 USB Icon
Advertising