INFICON HAPSITE ER Chemical Identification System User Manual
Page 384
11 - 46
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
AMDIS . . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered. This will determine the
concentration at which AMDIS will identify
the chemical. This setting determines the
chemicals displayed on the front panel of the
HAPSITE.
Display . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered which will determine the critical
concentration level at which a peak will be
displayed.
Alarm . . . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered which will trigger an alarm. The
alarm is set to either visual or audible by
using the Settings button. See
Figure 11-41
.
Figure 11-41 Setting the Alarm
Report . . . . . . . . . . . . . . . . . . . . . . . When enabled, a concentration can be
entered which will create a report when the
critical concentration level is reached. See
Figure 11-42
.
Figure 11-42 Setting the Report
There are two choices for reports, the Full TIC Peak Report and the AMDIS
Search Report.